EZ-Flo Touch Flush Valve για τουαλέτες Eljer, Πλωτήρας από καουτσούκ, επιχρωμιωμένο, 40079

Brand:EZ-FLO

3.5/5

Ft
42.09

ΠΕΡΙΓΡΑΦΗ ΠΡΟΪΟΝΤΟΣ Η βαλβίδα έκπλυσης αφής είναι κατασκευασμένη από υψηλής αντοχής και ανθεκτικό πλαστικό που παρέχει αντοχή και ανθεκτικότητα, καθιστώντας την μακράς διάρκειας και ανθεκτική στη διάβρωση. Η λαβή είναι κατασκευασμένη από πλαστικό και έχει ελκυστικό φινίρισμα χρωμίου για να του δώσει μια μοντέρνα εμφάνιση. Αυτή η συμβατή βαλβίδα εκκένωσης τουαλέτας με Eljer εγκαθίσταται γρήγορα και εύκολα, παρέχοντας μια τέλεια λύση για τις υδραυλικές ανάγκες της τουαλέτας σας. Η συσκευασία αποτελείται από μια πλαστική λαβή, μια βαλβίδα έκπλυσης και έναν ελαστικό πλωτήρα. ΑΠΟ ΤΟΝ ΚΑΤΑΣΚΕΥΑΣΤΗ Αυτή η βαλβίδα ξεπλύματος αφής ταιριάζει στις τουαλέτες Eljer. Αυτή η βαλβίδα έκπλυσης περιλαμβάνει μια επιχρωμιωμένη πλαστική λαβή, ελαστικό πλωτήρα και αλυσίδα. Κατασκευασμένο από ανθεκτικά υλικά που αντιστέκονται στη διάβρωση.

✅ΠΛΗΡΗΣ- Η συσκευασία αποτελείται από πλαστική λαβή, βαλβίδα έκπλυσης και ελαστικό πλωτήρα. ✅ΕΓΚΑΤΑΣΤΑΣΗ- Περιλαμβάνει όλα τα εξαρτήματα για εύκολη και γρήγορη εγκατάσταση. ✅ΠΟΙΟΤΗΤΑ- Κατασκευασμένο από υψηλής αντοχής και ανθεκτικό πλαστικό για αντοχή, ανθεκτικότητα και υλικά που αντέχουν στη διάβρωση. ✅ΛΕΙΤΟΥΡΓΙΚΟΤΗΤΑ- Σχεδιασμένο για χρήση με τουαλέτες Eljer. ✅ΣΧΕΔΙΑΣΜΟΣ- Διαθέτει λαβή με φινίρισμα χρωμίου που αντιστέκεται στη διάβρωση και προσθέτει μια μοντέρνα, κομψή εμφάνιση στην τουαλέτα σας.
Brand EZ-FLO
Country of Origin Taiwan
Domestic Shipping Item can be shipped within U.S.
Exterior Finish Chrome,Plastic,Rubber
Inlet Connection Type Barb
International Shipping This item can be shipped to select countries outside of the U.S.
Item Dimensions LxWxH 7.1 x 3.1 x 0.3 inches
Item model number 40079
Manufacturer EZ-FLO
Material Plastic
Product Dimensions 7.1 x 3.1 x 0.3 inches; 3.49 Ounces

3.5

8 Review
5 Star
71
4 Star
13
3 Star
8
2 Star
5
1 Star
3

Γράψτε την κριτική σας

Το email σας δεν θα δημοσιευτεί. Όλα τα υποχρεωτικά πεδία επισημαίνονται με*

Scritto da: Jvilled
Perfect fit
For my odd toilet, I looked all over replacement guts. No one sells it locally, certainly not at the hardware store. I was very grateful to find it on Amazon, and very affordable. It fit perfectly and has worked every since.
Scritto da: Earthview
Perfect for our older Eljer!
These are perfect for the design of the Eljer toilets! We have tried those after-market "universal fit" flapper systems... but they never worked right no matter what. We have enough toilets in the house that we would clean them out, let them dry for a few days, etc before placing the new flapper on... then we would let the putty sit and really set up before filling the tank back up. Never mattered what we did. Seemed like within a year, or even 6 months, the toilet had developed a slow leak again. Aargh! Not with these! We have two of these older Eljer toilets in the house. I did the one in the basement while reseating the tank at the same time. The 40+ year old bolt had broken and it was leaking. When getting the right part (below) I decided to try this funny looking stopper... and that was 3 years ago... and NO LEAKS with this design. So now I have also done the full repair job on the upstairs toilet and am looking forward to no more slow leaking there either. Installation is only a tiny bit tricky. May I suggest you also get the Danco 88359 Tank to Bowl Repair Kit at the same time as, if your bracket to hold the flapper is broken or missing, you will need to remove the tank to undo the right hand bolt. This is not hard (unless your bolts are in the condition ours were) and it's nice to get a new gasket between the bowl and tank anyway. There are bolts between the tank and the bowl to hold the bolt head and gasket snug to the tank, so you can't get the bold out to replace this part simply by removing the nut in the back of the bowl. Also, make sure you get off any and all residual plumber's putty from the bottom of the tank (if you used one of those "universal" kits) as this flapper ball will stick to that and be more difficult to flush. So get both parts at the same time... do it all fresh and you will be happy for years! Thank you Amazon for carrying actual replacement parts!
Scritto da: Raquel Herrera
Worked as intended
It worked as intended.
Scritto da: Sandy Rogers
Fit as advertised
Worked fine
Scritto da: kappa khachadoorian
great
just right, easy to install
Scritto da: VRunk
Only place I could find this!
I have a 1960s toilet that cannot easily be replaced, so was extremely happy to find this somewhat unusual combo to keep the toilet working.
Scritto da: Randy C.
ROUND HOLE Only...
Be sure to check and see what hole that you tank has for your handle. The handle parts for mine fit ONLY inside of a square hole, the square hole was made in the ceramic, the new piece 'should' fit inside, but only if you have a ROUND hole, I DID NOT. So, I had to rig it to where it'd work temporarily. In case it didn't make sense, I (wrongly) bought the square hole handle parts instead of the round hole parts. This is a pretty rinky-dink little handle set-up, but it does work, I mean, I guess it works, I couldn't figure out how to make the handle stay flushed without holding onto to it until all of the water was emptied. Just be sure. The parts were made really cheaply, the flush arm is VERY light plastic, I can see a problem with that, but, times are what they are.
Scritto da: Wesley T
Worked
I couldn’t find this one in the store. It worked great for me!

Σχετικά προϊόντα

Ανακαλύψτε το διεθνές μας δίκτυο

Στέλνουμε σε 28 χώρες, πάνω από 200.000 προϊόντα. Μείνετε ενημερωμένοι, εγγραφείτε στο ενημερωτικό δελτίο.

Array