Σετ απομόνωσης σπειροειδών ελατηρίων Energy Suspension 9.6104R

Brand:Energy Suspension

2.8/5

Ft
49.57

Η φύση αυτού του ανώτερου υλικού, του Energy Suspension's Hyper-Flex, είναι το αποτέλεσμα είκοσι και πλέον ετών εμπειρίας στην εργασία και τη σύνθεση υλικών πολυουρεθάνης. Χρησιμοποιείται προσεκτική επιλογή σκληρότητας υλικού ή σκληρόμετρου για κάθε συγκεκριμένη εφαρμογή στην ανάρτηση και το πλαίσιο του οχήματος. Οι τρεις πιο πολύτιμοι λόγοι για τη χρήση των εξαρτημάτων Hyper-Flex της Energy Suspension είναι η απόδοση, η ανθεκτικότητα και η εμφάνιση. Ονομάζεται HYPERformance, το Hyper-Flex της Energy Suspension είναι πολυουρεθάνη επιδόσεων που προσφέρει εκπληκτική απόδοση σε κάθε όχημα που τρέχει μαζί του. Αποδεδειγμένα τόσο στην πίστα όσο και στο δρόμο, εντός και εκτός δρόμου, υπό τις πιο απαιτητικές συνθήκες. Πάνω από είκοσι χρόνια θετικών εξάρσεων πελατών το έχουν επιβεβαιώσει. Είτε εγχώρια είτε εισαγόμενα, εμπρός, πίσω ή 4WD, είτε παλιά ή καινούργια, όλα τα οχήματα θα επιτύχουν αυτό το επίπεδο απόδοσης που έχει κάνει το Energy Suspension το πιο ζητούμενο όνομα στα εξαρτήματα ανάρτησης από πολυουρεθάνη επιδόσεων. Τα ανθεκτικά εξαρτήματα Hyper-Flex δεν σαπίζουν ούτε αλλοιώνονται από την έκθεση σε λάδια και χημικές ουσίες κάτω από το αυτοκίνητο ή ατμοσφαιρικές συνθήκες όπως η αιθαλομίχλη και το όζον. Σε αντίθεση με τον Ο.Ε.Μ. Τα εξαρτήματα από καουτσούκ, Hyper-Flex δεν θα σπάσουν και δεν θα φθαρούν προκαλώντας χυλό χειρισμό και κακή απόκριση του τιμονιού. Σίγουρα δεν είναι αυτό που θέλετε στο όχημά σας. Και για βελτιωμένη εμφάνιση, τα εξαρτήματα Hyper-Flex είναι διαθέσιμα σε κόκκινο ή μαύρο χρώμα, για να ταιριάζουν στις ανάγκες σας για εμφάνιση ή εμφάνιση.

Τα εξαρτήματα πολυουρεθάνης αντικατάστασης Hyper-Flex αντέχουν καλά σε ρύπους που συχνά καταστρέφουν το καουτσούκ και έχουν σχεδιαστεί για να παρέχουν μεγαλύτερη διάρκεια απόδοσης και να μην συμπιέζονται μόνιμα. Επαγγελματικά προϊόντα. Υψηλή απόδοση. Υψηλή ποιότητα.
Brand ‎Energy Suspension
Country of Origin ‎USA
Customer Reviews 3.8 3.8 out of 5 stars 43 ratings 3.8 out of 5 stars
Domestic Shipping Item can be shipped within U.S.
International Shipping This item can be shipped to select countries outside of the U.S. Learn More
Item model number ‎9.6104R
Item Weight ‎8 ounces
Manufacturer ‎Energy Suspension
Manufacturer Part Number ‎ENE-9.6104R
Model ‎COIL SPRING ISOLATOR SET
OEM Part Number ‎BDVQ9.6104R
Product Dimensions ‎3 x 6 x 7 inches

2.8

8 Review
5 Star
55
4 Star
10
3 Star
10
2 Star
7
1 Star
17

Γράψτε την κριτική σας

Το email σας δεν θα δημοσιευτεί. Όλα τα υποχρεωτικά πεδία επισημαίνονται με*

Scritto da: NinerBiker
No more cracked rubber spring isolators
I bought these to replace my rubber spring isolators while I was replacing struts and springs. My old isolators were dry-rotted and cracked. It may have been due to magnesium-chloride road de-icer as that seems to dry rubber and cause it to crack. Since they put Mag-Chloride on the roads in the winter here, I thought I should change to Polyurethane spring isolators while I was doing struts to prevent it from happening again. They were a good fit. The only reason I don't give them 5 stars is because they are not formed with 3 'steps' in them to allow for the 3 strut-mount stud heads. As a result they did not fit as flush as the factory isolators or the Monroe isolators (which came with my Monroe strut mounts).
Scritto da: AmazingGal
Unfortunately had to return :(
Product was not as described for the correct model of vehicle
Scritto da: Amazon Customer
These were a perfect replacement for the dry and dead rubber OEM isolators ...
These were a perfect replacement for the dry and dead rubber OEM isolators on my 22 year old car. They were the final pieces after having replaced all the other suspension bushings on my car with replacement polyurethane parts.
Scritto da: mpm
Better than stock, but still half of what it could be.
This fit OME 883 springs on Bilstein 5100 shocks and a generic KYB strut top for a '11 Tacoma. The urethane could definitely stand to be much stiffer, but it was better than the soft isolators that can with the strut tops. Fitment was decent once you slowed down and manually held the isolator in place while decompressing the spring.
Scritto da: Sharker3030
Two Stars
To soft
Scritto da: JOSE
MISLABELED ITEM RECEIVED
I RECEIVED WHAT LOOK LIKE SWAY BAR END LINK BUSHINGS THAT ARE MISLABELED WITH THE PART NUMBER 9.6104R. WAITING ON A REPLACEMENT
Scritto da: AV
2007 Sequoia
Used with a KYB mounts and Bilstein 4600 struts. Worked great and look better made than the KYB rubber isolator. Truck is running nice and smooth.
Scritto da: Taylor slusher
Sequoia 2002 sr5 lifted
Worked with my sequoia thanks

Σχετικά προϊόντα

Ανακαλύψτε το διεθνές μας δίκτυο

Στέλνουμε σε 28 χώρες, πάνω από 200.000 προϊόντα. Μείνετε ενημερωμένοι, εγγραφείτε στο ενημερωτικό δελτίο.

Array