Enbrighten, White & Light Almond, GE Z-Wave Plus Smart Motion Light Dimmer, Λειτουργεί με Alexa, Google Assistant, SmartThings, Wink, Zwave Hub Required, Repeater/Range Extender, 3-Way Compatible, 26933

Brand:Enbrighten

3.2/5

Ft
120.37

Βάλτε σε κίνηση τον οικιακό αυτοματισμό με το Enbrighten Z-Wave In-Wall Smart Motion Dimmer. Όταν συνδυάζεται με έναν συμβατό διανομέα, το ενσύρματο έξυπνο ροοστάτη λειτουργεί με φώτα οροφής, φωτιστικά τοίχου και πολλά άλλα μέσω μεμονωμένων εντολών και προγραμματισμένων ρυθμίσεων. Ελέγξτε και προγραμματίστε ασύρματα φωτιστικά εσωτερικού ή εξωτερικού χώρου για αβίαστη διαχείριση του σπιτιού σας. Οι δυνατότητες αυτοματοποίησής σας είναι φαινομενικά άπειρες όταν συνδέεστε με κόμβους από Wink, SmartThings, Home Seer, Vera, Nexia και άλλα.

ΕΥΚΟΛΗ ΕΓΚΑΤΑΣΤΑΣΗ – Απαιτεί εσωτερική εγκατάσταση στον τοίχο με ενσύρματες συνδέσεις. ΑΠΑΙΤΕΙΤΑΙ ΟΥΔΕΤΕΡΟ ΣΩΜΑ. Περιλαμβάνει κουμπιά καλύμματος λευκού και ανοιχτού αμυγδάλου (δεν περιλαμβάνεται η πλάκα τοίχου). Δυνατότητα φωτεινότητας πλήρους εύρους για χρήση με ρυθμιζόμενα LED και CFL, καθώς και λαμπτήρες πυρακτώσεως και αλογόνου. Υποστηριζόμενη ισχύς – 600W πυρακτώσεως. 150W LED/CFL. Υποστηριζόμενη τάση – 120VAC. Εύρος θερμοκρασίας λειτουργίας 32-104 βαθμούς Φαρενάιτ. ΚΑΛΥΨΗ ΠΛΗΡΗΣ ΟΙΚΙΑΣ – Το Z-Wave Plus συνεργάζεται με όλες τις προηγούμενες γενιές Z-Wave για να επιτρέπει τη συνεχή επέκταση του δικτύου οικιακού αυτοματισμού σας. Το dimmer είναι ικανό να ελέγχει εσωτερικά ή εξωτερικά φωτιστικά για αυτοματισμό ολόκληρου του σπιτιού και επαναλαμβάνει το σήμα Z-Wave από τον διανομέα σας ή άλλες συσκευές για να επεκτείνει την εμβέλειά σας έως και 150 πόδια. Το εκτεταμένο εύρος σήματος αυξάνει την κάλυψη του οικιακού αυτοματισμού σας για να βελτιώσει τον έλεγχό σας. 3-WAY READY – Η έξυπνη συσκευή λειτουργεί τέλεια μόνη της ή ενσωματώνεται απρόσκοπτα σε ρυθμίσεις πολλαπλών διακοπτών με απαιτούμενους πρόσθετους διακόπτες – μοντέλα 12723 ή 46199. Στην ίδια συσκευή μπορούν να συνδεθούν έως και τέσσερις πρόσθετοι διακόπτες. SELECT MOTION CONTROL – Ο ροοστάτης ρυθμίζει τα επίπεδα φωτεινότητας των ρυθμιζόμενων λαμπτήρων LED, CFL, πυρακτώσεως και αλογόνου από 0-100 τοις εκατό για να μειώσει το κόστος ενέργειας και να βελτιώσει τη διάρκεια ζωής του λαμπτήρα. Εξατομικεύστε το dimmer με τρεις επιλογές ανίχνευσης κίνησης – πληρότητα, κενή θέση και χειροκίνητη. Η λειτουργία κατάληψης ανάβει/απενεργοποιεί τα φώτα αυτόματα, ενώ τα φώτα ανάβουν χειροκίνητα και σβήνουν αυτόματα στη ρύθμιση κενής θέσης. Για να απενεργοποιήσετε τον αισθητήρα κίνησης, επιλέξτε χειροκίνητη λειτουργία. Με πέντε επιλογές διάρκειας χρονικού ορίου που κυμαίνονται από πέντε δευτερόλεπτα έως 30 λεπτά και κάλυψη ανίχνευσης έως και 180 μοιρών, το dimmer φιλοξενεί οποιοδήποτε δωμάτιο με ποικίλες ποσότητες δραστηριότητας. Επιπλέον, απολαύστε προσαρμοσμένες σκηνές, ευέλικτο προγραμματισμό και βολικές ειδοποιήσεις με τηλεχειρισμό και φωνητικό έλεγχο όταν είναι συνδεδεμένος σε συμβατό διανομέα. VOICE CONTROL – ΣΥΜΒΑΤΟ με ALEXA & GOOGLE ASSISTANT (απαιτείται διανομέας πιστοποιημένου Z-Wave). Λειτουργεί με τους ακόλουθους διανομείς με πιστοποίηση Z-Wave: SmartThings, Ring Alarm, Wink, ADT Pulse, ADT Command, Trane, Vivint, Nexia, Honeywell, Home Seer, Harmony Home Hub Extender, Vera και άλλα.
Actuator Type Push Button
Actuator Type ‎Push Button
Batteries Included? ‎No
Batteries Required? ‎No
Brand Enbrighten
Brand ‎Enbrighten
Circuit Type 3-way
Circuit Type ‎3-way
Color ‎White & Light Almond
Connectivity Protocol ‎Wi-Fi, Z-Wave
Control Method ‎Voice
Controller Type ‎Nexia, Vera, Google Assistant, Amazon Alexa, SmartThings
Country of Origin ‎China
Customer Reviews 4.1 4.1 out of 5 stars 178 ratings 4.1 out of 5 stars
Included Components ‎1 In-Wall Sensor
International Protection Rating IP00
International Protection Rating ‎IP00
Is Discontinued By Manufacturer ‎No
Item Dimensions LxWxH 1.5 x 1.5 x 3 inches
Item Dimensions LxWxH ‎1.5 x 1.5 x 3 inches
Item model number ‎26933
Item Package Quantity ‎1
Item Weight ‎7 ounces
Manufacturer ‎Jasco Products Company, LLC
Mechanical Life Expectancy ‎2 years
Mounting Type Wall Mount
Mounting Type ‎Wall Mount
Number of Items ‎1
Operating Voltage 120 Volts
Operating Voltage ‎120 Volts
Operation Mode ON-OFF
Operation Mode ‎ON-OFF
Part Number ‎26933
Product Dimensions ‎1.5 x 1.5 x 3 inches
Size ‎Dimmer
Style ‎Motion Dimmer
Switch Style Motion Dimmer
Switch Style ‎Motion Dimmer
Terminal Spdt
Terminal ‎Spdt
Unit Count ‎1.0 Count
Upper Temperature Rating ‎40 Degrees Celsius
Warranty Description ‎2-Year Limited Warranty
Wattage ‎600 watts

3.2

4 Review
5 Star
59
4 Star
20
3 Star
6
2 Star
4
1 Star
10

Γράψτε την κριτική σας

Το email σας δεν θα δημοσιευτεί. Όλα τα υποχρεωτικά πεδία επισημαίνονται με*

Scritto da: Corey
Works well, a bit pricey
The product itself works great. I am using one for my guest bathroom and laundry room. I think the price is a bit high for what you get but there are not a lot of comparable zwave in wall switch/motion sensors. Having the motion sensor built into the switch eliminates the need for a battery or usb cable. Of course, your switch has to be located such that the field of view will detect the traffic like you want. I did have a slight issue getting the switch plate to fit over the switch. The buttons wouldn’t move freely. I just used some sandpaper to make the opening slightly larger and I was in good shape.
Scritto da: Scott Reston
Great switch for half-bath, good Home Assistant support
Installed this in my half-bath and have it connected to Home Assistant via Zwave-JS. It's working great so far. You can configure the light to stay on up to 30 minutes after motion. The motion sensor in Home Assistant reports "OFF" in about 25 seconds. I put a contact sensor on the bathroom door and set up a template sensor that's "on" when there's motion from the switch sensor or the door is closed. I have Home Assistant turn off the light when that sensor goes "off". So in practice, if you close the door, the light will stay on for you whether you move around enough to keep the motion sensor happy. But if the door is open, the light'll turn off after about 25 seconds with no motion. This works great for us as you can see the reflection of the bath light on our living room TV.
Scritto da: RAF
Got to know what you are doing :)
I have about a dozen of these in my new home and they are working great. But unlike more most reviewers I use Hubitat and not Wink or Smartthings. Hubitat allows controlling the advance features of this device and also does not use an internet connection to a remote Wink or Smartthings server. I have my switches setup in "Automatic" mode and when the light turns on Hubitat switches the mode to manual. This allows me to control the switch in a more sophisticated way. For example, in our master bathroom with the switch in automatic mode you walk into the room and the lights turn on immediately. But leaving the switch in automatic mode is a problem when we go into our walk in shower and are out of view, after X number of minutes the lights would turn off. The solution was to put a motion sensor in the shower (it has a high ceiling and stays dry). By creating a Hubitat rule and switching the dimmer to manual mode once the lights are turned on and using motion seen by either motion sensor, the shower or GE dimmer, Hubitat keeps the lights on in the bathroom. The shower motion sensor has another rule to turn on the shower lights and fan (another GE Z-Wave Switch).. The combination of Automatic and Manual modes and the Hubitat controller has been a very useful technique in automating my home lighting. Hubitat also controls the dimmer settings used throughout the day and night and I've seen no issues. It's nice to walk into the bathroom late at night or early morning and now be blinded with very bright lights!
Scritto da: Pierce Thomas
Works well, would recomend if a motion switch is needed.
I recently took the leap into starting my smart home. I purchased a few switches and thought I would leave a review that other might find helpful as a first-time setup. Below are a few details about my current configuration with the GE 26933 Motion Switch. Setup: I am using 4 of the Cree 9.5W Dimmable LEDs Cree 65W Equivalent Soft White (2700K) 9.5W BR30 9W Dimmable LED Flood Light Bulb (4-Pack) For a total load of about 47.5w on the switch. One note about the bulbs (not necessarily about the switch) is the fact that there is a slight buzzing noise, but only while in a dimmed state. PRO: • Smooth Dimming • Silent operation (no noise turning on or off) • 4x configurable associations • Motion sensing • Never worry about turn off (if you have the motion sensing activated, you never have to worry about shutting the switch off.) CONS: • Very large body (This switch takes up a lot of space in the junction box, make sure you have enough room) • No settable minimum brightness (some of the Lutron switches have a configurable minimum for LEDs) • Minimum brightness is not the same as other GE Z-Wave switches such as the GE 14294. Minimum on the GE 26933 is roughly what 30% would be on the GE 14294. The GE 14294 will go completely dark if dimmed all the way and will appear “off”. • If the switch is turned on by motion, it never appears to turn off in the Hub. It is as if the switch “dims” to 0% (not a big deal, but it does show the Hub that it is on) • I had difficulties trying to change the motion settings using the buttons as the manual describes. • No supplied cover. The Lutron screw less cover “White” matches the switch perfectly.Lutron Claro Single-gang Wallplate - Parent All in all I do really enjoy this switch, there are a few quarks to get around, but the motion sensing works very well. I have this switch installed next to stairs and it lets me know when someone is coming up. It has an automatic time out that is “configurable”, but I have yet to get it to change from the default of 5min. The color of this switch and other

Σχετικά προϊόντα

Ανακαλύψτε το διεθνές μας δίκτυο

Στέλνουμε σε 28 χώρες, πάνω από 200.000 προϊόντα. Μείνετε ενημερωμένοι, εγγραφείτε στο ενημερωτικό δελτίο.

Array