Drill America POUM6X1 m6 x 1 Tap and 5,00mm Drill Bit Kit, POU Series M6 x 1 m6 x 1 Tap - Τρυπάνι 5,00mm

Name: Drill America POUM6X1 m6 x 1 Tap and 5,00mm Drill Bit Kit, POU Series M6 x 1 m6 x 1 Tap - Τρυπάνι 5,00mm
Brand: Drill America
SKU: 0887861290258
Price: 25.78 HUF
Availability: InStock

Brand:Drill America

3.5/5

Ft
25.78

Πληροφορίες βρύσης: Η βρύση με σπείρωμα της σειράς Drill America DWT είναι οι πιο ευέλικτες βρύσες για χρήση με το χέρι ή για χτύπημα υπό ισχύ. Η βρύση με σπείρωμα με το χέρι είναι δημοφιλής για χρήση στο γενικό χτύπημα με μηχανή ή στο χτύπημα CNC. Αυτό είναι επίσης κατάλληλο για το χτύπημα της συντριπτικής πλειοψηφίας των υλικών σε συνθήκες διαμπερούς ή τυφλής οπής. Στυλ κωνικό: ξεκινά το τετράγωνο του νήματος με το τεμάχιο εργασίας. Στυλ βύσματος: χρησιμοποιείται γενικά σε τρύπες. Στυλ κάτω μέρος: δημιουργήστε το νήμα στο κάτω μέρος της τρύπας. Σετ: Περιέχει κωνικό, βύσμα και κάτω βρύσες. . Πληροφορίες για το τρυπάνι: Το τρυπάνι υψηλής ταχύτητας Drill America dwdn Series είναι ένα αξιόπιστο τρυπάνι γενικής χρήσης που έχει σχεδιαστεί για εκτέλεση σε ένα ευρύ φάσμα υλικών της οικογένειας σιδήρου και χάλυβα. Ιδανικό για εργασίες παραγωγής, συντήρησης ή φορητές εργασίες γεώτρησης. Επιφάνεια επεξεργασμένη με μαύρο οξείδιο ανθεκτικό στην τριβή. Η επεξεργασία με μαύρο οξείδιο προσθέτει λιπαντικότητα και δημιουργεί μικρές θήκες στην επιφάνεια του εργαλείου που δρουν για να συγκρατούν το ψυκτικό κοντά στην αιχμή. Τα στρογγυλά στελέχη επιτρέπουν τη χρήση με μεγάλη ποικιλία συστημάτων συγκράτησης εργαλείων. Όταν λειτουργούν αριστερόστροφα (κόψιμο δεξιά), τα σπειροειδή αυλακωτά εργαλεία εκκενώνουν τα τσιπ προς τα πάνω και έξω από την κοπή για να μειώσουν το φράξιμο.

Ποσό

Προσθήκη στο καλάθι Αγορασε τωρα

EAN: 0887861290258

Κατηγορίες Βιομηχανικά & Επιστημονικά, Εργαλεία κοπής, Taps, Βασίλια κοπής σωλήνων,

Το σετ διατίθεται σε πλαστική θήκη. Βρύση βύσματος M6 x 1 hss και αντίστοιχο τρυπάνι hss 5,00 mm σε πλαστική θήκη. Το τρυπάνι μαύρου οξειδίου είναι ιδανικό για εργασίες παραγωγής, συντήρησης ή φορητές εργασίες διάτρησης. Η βρύση με σπείρωμα με σπείρωμα από χάλυβα υψηλής ταχύτητας είναι δημοφιλής για χρήση σε γενικό χτύπημα μηχανών ή cnc. Το σετ περιέχει χειροκίνητη τάπα από χάλυβα υψηλής ταχύτητας και αντίστοιχο τρυπάνι από χάλυβα υψηλής ταχύτητας.

Brand	Drill America
Country of Origin	China
Cutting Angle String	45 Degrees
Finish Type	Uncoated
Item model number	POUM6X1
Manufacturer	Drill America
Material	High Speed Steel
Product Dimensions	6 x 4 x 2 inches; 1.06 Ounces
Shank Type	Square

5 Star

4 Star

3 Star

2 Star

1 Star

Γράψτε την κριτική σας

Το email σας δεν θα δημοσιευτεί. Όλα τα υποχρεωτικά πεδία επισημαίνονται με^*

Η βαθμολογία σας

Scritto da: Fourvalv

Worked exactly as needed

-Tap seemed to be good metal, sharp cutting edges -I used it in ALUMINUM, so don't have input on using on harder metals at this point -Bit was fine -The combo seemed to be correctly matched/sized -Bolt (for that the hole was tapped for) fit as needed -I gave 5 stars for durability but don't have a long term trial or hard metal result as of this review I would recommend and purchase again

Scritto da: Zak

Not bad but the drill bit is very weak

I used this bit and tapped some holes for my laser engraver frame with 2020 V-slot aluminum. I also used the slowest speed at 600rpm on my drill press, but it snapped by the second hole going slow. If I were you, I would have a high-quality backup drill bit. Otherwise, the threading went without an issue, and the tolerance seems good. I was bummed about the drill bit, but I had backup bits, so it wasn't a huge deal.

Scritto da: Chester Charnesky

Did what I needed it for

Did what I needed it for a d was cheaper then just a drill bit in the local store.

Scritto da: Tom Blankenship

Awesome

Exactly what I needed. Got the job done

Scritto da: Bernie Bartella

Drill n tap

Product works good

Scritto da: Michael Arruda

Drill and tap

Small stuff like this is very tough. But it did the job. Use much lubrication

Scritto da: Jared wright

Works

Works

Scritto da: Joshua Ayala

Good product

Good tap n die set. If you know how to use it correctly you can use it numerous times. 10/10

Scritto da: C.A. Lache

They work great together

The bit and the tap are both good. Keep in mind the bit is "general purpose" and not high grade for drilling hardened/stainless steel. You can, but expect it not to last even with care. I'm using them to drill and tap diecast cars so the material bites into ZAMAC (the alloy diecast used in model cars) fairly well. Just be sure to lubricate during drilling/tapping. Be gentle with the tap when removing. Don't be fooled - Any little bit or flex or torsion will snap them, I should know. This is my second purchase. Anyone trying to use this 'general purpose' grade drill and tap with hardened metals will be disappointed. Don't let those reviews fool you. Softer metals, plastic and hardwoods are a breeze if you have patience. If you have hardened metals / stainless steel to tap and drill, buy more expensive (purpose built) carbide bits. Know the Rockwell hardness of your metals and purchase bits/taps accordingly.

Scritto da: Peter B.

Worked well until it broke.

I tapped 26 - 6mm holes ln 1/4 in galvanized posts on the 27th and last hole the tap tip snapped. I was able to get it out and finish the job with the broken tap. So it completed the job. I was using three in one oil for tap oil so that may have caused the problem. I did find I had to run the tap in the holes twice to get the 6 mm bolts the thread in properly. I got the job done so I guess it was okay.

Scritto da: George of the jungle

Poor Quality

I bought several of these as I recognize that tapping 2-56 threads is tricky and taps break easily. However, I expected to cut more than 2 threads deep without breaking a tap. The problem may be that the supplied drills (all of them) are the wrong size for 2-56 threads. The drill should be a #50 (.0700) but what comes in these kits is something between a #51 and #52. These might work in soft metals like aluminum but are totally useless in steel. My experience with Chinese tools is that they are either reasonable quality and well priced or total junk. These are definitely in the junk class. I have ordered replacements from an industrial supplier who sells US and British tools. They cost 3 times as much but end up being cheaper in the long run.

Scritto da: Mac

Absolute Garbage

Update: Read first review underneath but I went to princessauto and got a drillbit for $1.49 that did the whole project with no issue. Tried this tap and it was just as bad as the drill bit, had to go buy a different tap as well. DO NOT BUY! Drill bit is weak and can't drill through anything. I didn't even get to use the tap yet because the drill bit is the worst quality I have ever seen and broke almost immediately. Read the other reviews, many people had the same problem, I shouldn't have ignored all the problems that were listed. Complete waste of $8, DO NOT BUY!! YOU WILL REGRET IT IMMEDIATELY!!

Scritto da: Stefan in Canada

Tap is larger than claimed #2-56

Bought to drill #2-56 threaded holes in plastic. After drilling the hole with the supplied bit, it's the right size. After threading the hole with the tap, genuine #2-56 bolts just slide right through. Measuring the tap with a caliper, it's about 20% larger in diameter than it should be, despite being marked #2-56. I'm returning it.