Drill America - DWTCS112-12X1,25 m12 X 1,25 1-1/2 OD Carbon Steel Round Die, σειρά DWT

Brand:Drill America

3.5/5

Ft
42.80

M12X1.25 1-1/2OD CS Στρογγυλή Ζάρα.

Δεν υπάρχουν διαθέσιμες μονάδες
Η σχισμή είναι λοξότμητη έτσι ώστε όταν οι μήτρες χρησιμοποιούνται σε μια θήκη μηχανής, η βίδα ρύθμισης μπορεί να αφαιρεθεί και να γίνει προσαρμογή από τις βίδες ρύθμισης στη θήκη. Η προσαρμογή επιτυγχάνεται με μια βίδα λεπτού βήματος που αναγκάζει τις πλευρές της μήτρας να χωρίσουν ή τους επιτρέπει να αναπηδήσουν μαζί. Η μία πλευρά έχει μια λοξότμηση 2 έως 3 νημάτων για το πέρασμα, η άλλη πλευρά έχει μια λοξότμηση 1 έως 1-1/2 κλωστών για το πέρασμα κοντά σε έναν ώμο. Οι στρογγυλές μήτρες είναι λοξοτμημένες και στις δύο όψεις. Η στρογγυλή ρυθμιζόμενη μήτρα από ανθρακούχο χάλυβα είναι επιθυμητή για βελτιωμένη διάρκεια ζωής.
Item model number DWTCS112-12X1.25
Manufacturer Drill America
Package Dimensions 2.7 x 2.5 x 0.5 inches; 2.4 Ounces
size m12 x 1.25

3.5

10 Review
5 Star
70
4 Star
13
3 Star
9
2 Star
3
1 Star
5

Γράψτε την κριτική σας

Το email σας δεν θα δημοσιευτεί. Όλα τα υποχρεωτικά πεδία επισημαίνονται με*

Scritto da: Bob
Didn’t use returned, it was rusted on the backside of the die and I didn’t take it out of the bag!
N/A
Scritto da: josh odom
Clean. Cut product
It came in nice multi use. Case. Easy for storage an reusable
Scritto da: Mike
It worked and had adjusting screw
Used it to clean up a severely roughed up tie rod end bolt. With adjusting screw, I was able to work the die back and forth gradually cleaning up the threads. Saved me for replacing the tie rod. And yes, it was all my fault.
Scritto da: The Jackal
Works as good as the ones costing $100
This works as good as the ones that cost 3 x as much
Scritto da: KNIGHT
Fantastic ????
Fantastic product great price well made. Used it to clean the bolts on my Ram truck to install running boards. Made it much easier then using wire brush to take the paint off. Cleaned up well. ????
Scritto da: Consumer_Zero
Did the job
I used this to make 304 stainless steel studs. Cut multiple threads fine without issue, no signs of fatigue on the die yet. Mine had the adjustment screw.
Scritto da: Kerry McCormack
Does NOT have adjusting screw.
Overall it worked for what i needed it to do, but it might as well be labeled one time use or disposable. It does NOT have a adjusting screw to space out the cutting surfaces like the description says it does. If it did it would probably last a lot longer as you could cut into the material gradually.
Scritto da: Raul
Solid die!
Die worked perfectly. Threaded with ease. I highly recommend.
Scritto da: Josh Chapman
One Star
Snapped into two pieces the first time I used it.
Scritto da: Alain Deblois
Three Stars
bien reçu tout est correct 5 étoiles

Σχετικά προϊόντα

Ανακαλύψτε το διεθνές μας δίκτυο

Στέλνουμε σε 28 χώρες, πάνω από 200.000 προϊόντα. Μείνετε ενημερωμένοι, εγγραφείτε στο ενημερωτικό δελτίο.

Array