CURT 56126 Προσαρμοσμένη πλεξούδα καλωδίωσης τρέιλερ 4 ακίδων Vehicle-Side, Ταιριάζει σε επιλεγμένα Hyundai Elantra, Μαύρο

Brand:Curt Manufacturing

3.7/5

Ft
93.62

Εάν το όχημά σας δεν είναι εξοπλισμένο με καλωδιώσεις για τη ρυμούλκηση τρέιλερ, η προσαρμοσμένη καλωδίωση CURT είναι η ιδανική λύση. Μια προσαρμοσμένη πλεξούδα καλωδίωσης -- που ονομάζεται επίσης βύσμα T -- είναι μια απλή ηλεκτρική συσκευή plug-and-play που συνδέεται στο ηλεκτρικό σύστημα του αυτοκινήτου σας και παρέχει μια τυπική, καθολική σύνδεση καλωδίωσης τρέιλερ. Αυτό γίνεται με χρήση δύο ή περισσότερων συνδετήρων συμβατών με OEM ειδικά για το όχημα για σύνδεση στο συγκρότημα του πίσω φανού, εξαλείφοντας την ανάγκη για κοπή, μάτισμα και συγκόλληση κατά την εγκατάσταση. Οι προσαρμοσμένες καλωδιώσεις είναι ειδικά σχεδιασμένες για το όχημα και, ενώ δεν είναι διαθέσιμες για όλα τα οχήματα, προσφέρουν έναν από τους ταχύτερους, ευκολότερους και ασφαλέστερους τρόπους καλωδίωσης ενός οχήματος για ρυμούλκηση. Αυτή η συγκεκριμένη πλεξούδα σύνδεσης παρέχει μια επίπεδη υποδοχή σύνδεσης 4 κατευθύνσεων και έχει σχεδιαστεί για να είναι μια προσαρμοσμένη καλωδίωση για να ταιριάζει σε ορισμένα χρόνια του Hyundai Elantra (για να επαληθεύσετε τη συμβατότητα του οχήματός σας, δείτε πληροφορίες εφαρμογής). Συνοδεύεται από όλα τα απαραίτητα εξαρτήματα καλωδίωσης για τη δημιουργία αξιόπιστης σύνδεσης καλωδίωσης ρυμουλκούμενου, καθώς και κάλυμμα σκόνης για να διατηρείται ο σύνδεσμος καθαρός όταν δεν χρησιμοποιείται. Έχετε στο μυαλό σας μια εικόνα του επόμενου προορισμού σας -- ίσως είναι το σκάφος που προσγειώνεται στο αγαπημένο σας σημείο ψαρέματος, ίσως είναι ένα κάμπινγκ που έχει θέα σε ένα από τα αριστουργήματα της φύσης ή ίσως είναι το επόμενο μεγάλο εργοτάξιο. Ωστόσο, η μετατροπή αυτής της εικόνας σε πραγματικότητα απαιτεί περισσότερα από μια απλή ονειροπόληση. Χρειάζεται μια σταθερή σύνδεση και τη σωστή ποσότητα ισχύος. Η προσαρμοσμένη καλωδίωση CURT είναι κατασκευασμένη με μερικές από τις πιο εξελιγμένες τεχνολογίες του κλάδου και έχει σχεδιαστεί για εύκολη εγκατάσταση, παρέχοντάς σας ηλεκτρική σύνδεση μεγάλης διάρκειας για τη ρύθμιση του κοτσαδόρου ρυμούλκησης.

ΚΑΛΥΜΜΑ ΓΙΑ ΤΗ ΣΚΟΝΗ. Για να προωθήσετε τη μακροχρόνια χρήση και την αντοχή στις καιρικές συνθήκες, αυτή η 4πολική καλωδίωση φωτισμού τρέιλερ διαθέτει κάλυμμα από καουτσούκ για τη σκόνη. Προσαρμόζεται εύκολα στην επίπεδη υποδοχή 4 κατευθύνσεων όταν δεν χρησιμοποιείται, προστατεύοντάς την από τα εξωτερικά στοιχεία. ΑΞΙΟΠΙΣΤΗ ΙΣΧΥ. Αυτή η πλεξούδα καλωδίωσης τρέιλερ 4 κατευθύνσεων είναι κατασκευασμένη με τεχνολογία επιφανειακής τοποθέτησης. Αυτός ο τύπος κυκλώματος παράγει λιγότερη θερμότητα, βέλτιστη ένταση φωτός και ανθεκτική απόδοση. ΕΙΔΙΚΟ ΟΧΗΜΑ. Αυτή η πλεξούδα καλωδίωσης μετά την αγορά, οχήματος-ρυμουλκούμενου είναι σχεδιασμένη για επιλεγμένα χρόνια του Hyundai Elantra. ΣΤΑΝΤΑΡ ΣΥΝΔΕΣΗ. Αυτή η plug-in καλωδίωση ρυμουλκούμενου 4 επιπέδων μπορεί να χρησιμοποιηθεί για τη σύνδεση πίσω φώτων τρέιλερ, φώτων φρένων και φλας. Η καλωδίωση φώτων τρέιλερ 4 κατευθύνσεων είναι δημοφιλής σε μια ποικιλία τρέιλερ, προσθέτοντας ευέλικτες επιλογές ρυμούλκησης για το όχημά σας. ΕΥΚΟΛΗ ΕΓΚΑΤΑΣΤΑΣΗ. Χωρίς κόψιμο! Χωρίς μάτισμα! Αυτό το κιτ πλεξούδας καλωδίωσης ρυμουλκούμενου συνδέεται στην υπάρχουσα εργοστασιακή καλωδίωση του οχήματός σας και το εξοπλίζει με μια τυπική, πίσω υποδοχή καλωδίωσης ρυμουλκούμενου 4 ακίδων για σύνδεση και ρυμούλκηση τρέιλερ.
Brand ‎Curt Manufacturing
Country of Origin ‎USA
Customer Reviews 4.6 4.6 out of 5 stars 121 ratings 4.6 out of 5 stars
Is Discontinued By Manufacturer ‎No
Item model number ‎56126
Item Weight ‎9.6 ounces
Manufacturer ‎Curt Manufacturing
Manufacturer Part Number ‎56126
Model ‎Custom Wiring
OEM Part Number ‎56126
Product Dimensions ‎4 x 3 x 9 inches

3.7

12 Review
5 Star
76
4 Star
13
3 Star
9
2 Star
0
1 Star
2

Γράψτε την κριτική σας

Το email σας δεν θα δημοσιευτεί. Όλα τα υποχρεωτικά πεδία επισημαίνονται με*

Scritto da: RangoonGoon
Does exactly what you expect
Install was very easy if you've ever done any automotive work. I could replicate the functionality on my own, but for the price, this plug and play harness makes it not at all worth it to look at wiring diagrams, source my own components, and splice any wires. Anyone with a lick of confidence could get through this in about 15 minutes, or 5 minutes if you're already good with trim clips. If this was the first thing you ever attempted on your own car, i say go for it. Easier than an oil change, really.
Scritto da: Thomas
Works for 2015 Elantra
Used a long screw driver to remove the plastic snaps that hold the center and side panels in place. Reading the instructions will let you which color wire goes where, but the longer wire runs to the passenger side and shorter goes to the driver's side. Had to drill a small hole for the green wire.
Scritto da: CJ
Quick and easy
Easy to install and simple to use.
Scritto da: Tom L
Easy install
The “crimping” harness came with the trailer. That was junk. Never worked properly and took a while to install. This installed in just a few minutes and works perfectly. I wish I knew about this 5 years ago. In process of buying this I also discovered “Amazon Garage”. That is great.
Scritto da: Ken Greener
Easy as 1-2-3
I was doubtful it was going to be that easy. The install took as much time as opening up the package. VERY easy to install in a 2013 Hyundai Elantra. Do keep in mind as you tow the wiring will hang out the trunk, unless you drill a hole in the trunk liner and caulk. I will suggest this product in the future.
Scritto da: Lee
Works great, simple to install
This T-connector makes installation easy. No cutting or splicing wires. The hardest part was just popping off the covers that lined the back of the trunk. I installed mine so that the wiring harness stores in the spare tire wheel well when not in use. In the 2011 Elantra there is plenty of space down there for the wiring and the receiver to be stored together.
Scritto da: TT
Would bug again.
Customer service and lighting kit was definitely a good choice. Highly recommended.
Scritto da: Tom A.
Works with my Hyundai Elantra 2015 Sport
Title and rating says it all. Works great and the cable is very long.
Scritto da: Ricky
Juste parfait!
Très facile à installer et fonctionne très bien. 5 stars
Scritto da: BobFromOttawa
Super quick install without splicing any of my car's wires.
What a terrific product. I was fully prepared to splice into my car's tail light wiring until I found this idiot-proof solution available for my Hyundai Elantra. Connectors match those factory installed behind my taillights. The only extra thing I needed to do was connect a ground wire to a metal spot in my trunk with a self tapping screw. In minutes, I have a correctly wired, functioning 4-pin trailer plug to connect to a utility trailer. And if there is ever a need, I can uninstall it and return the system back to how it was originally. No cut wires, electrical tape, or bad joints.
Scritto da: Luke
Functions
Great product,I installed this on my gf elantra in 15min,i removed rear covers and put back and connect,tested all working good
Scritto da: dziff
5 minute install !
by far the easiest harness to install. took about 5 minutes to install using the quick connect plugs. It took me longer to find the drill bit to drill the hole than it did to install the whole harness after ! Installed on my 2012 elantra gls.

Σχετικά προϊόντα

Ανακαλύψτε το διεθνές μας δίκτυο

Στέλνουμε σε 28 χώρες, πάνω από 200.000 προϊόντα. Μείνετε ενημερωμένοι, εγγραφείτε στο ενημερωτικό δελτίο.

Array