CURT 45006 ATV 2 ιντσών με μπουλόνι, προσαρμογέας δέκτη τρέιλερ UTV

Brand:CURT

3.4/5

Ft
85.61

Δεν υπάρχει τίποτα σαν την αίσθηση της ελευθερίας και της περιπέτειας που συνοδεύει ένα ATV. Στριφογυρίζοντας μέσα στη λάσπη, πλοηγώντας σε ένα μονοπάτι στο δάσος ή απλά οδηγώντας πίσω στη θέση ελαφιών σας -- όπου κι αν σας αρέσει να οδηγείτε, γνωρίζετε τη συγκίνηση του ATVing. Τα προϊόντα ρυμούλκησης CURT ATV ​​σάς επιτρέπουν να μεγιστοποιήσετε την εμπειρία σας στο ATV παρέχοντάς σας λειτουργικό εξοπλισμό που έχει κατασκευαστεί για να διαρκεί. Ο προσαρμογέας ATV με μπουλόνι CURT είναι ένας πολυλειτουργικός εξοπλισμός που σας βοηθά να αξιοποιήσετε στο έπακρο το ATV σας. Ο προσαρμογέας απλώς βιδώνει στη γλώσσα του ATV χρησιμοποιώντας το παρεχόμενο υλικό και παρέχει ένα άνοιγμα σωλήνα δέκτη 2 x 2 για να δέχεται ένα στέλεχος στήριξης μπάλας ή κάποιο άλλο εξάρτημα ρυμούλκησης. Ο προσαρμογέας ATV με μπουλόνι CURT έχει ένα δακτύλιο ιμάντα συγκολλημένο ακριβώς πάνω στο σκελετό του, παρέχοντας ένα σταθερό σημείο σύνδεσης για έναν ιμάντα ρυμούλκησης ή σχοινί, και διαθέτει επίσης μια πλάκα σταθεροποίησης που εμποδίζει τον προσαρμογέα και το επακόλουθο φορτίο να ταλαντεύονται και να περιστρέφονται κατά τη διάρκεια του ταξιδιού. Είναι κατασκευασμένο από ποιοτικό χάλυβα και συγκολλάται με ακρίβεια. Επικαλύπτουμε τον προσαρμογέα στερέωσης μπάλας CURT ATV ​​με γυαλιστερό μαύρο φινίρισμα επίστρωσης για να εξασφαλίσουμε μακροχρόνια πρόληψη σκουριάς, γρατσουνίσματος, θρυμματισμού και ζημιάς από την υπεριώδη ακτινοβολία. Όποιο και αν είναι το όχημα παντός εδάφους της επιλογής σας -- τετράτροχο, τετράτροχο ποδήλατο, τρίτροχο ή τετράτροχο -- δώστε στον εαυτό σας το πλεονέκτημα με τα προϊόντα ρυμούλκησης CURT ATV.

ΑΝΘΕΚΤΙΚΟ ΣΤΗ ΔΙΑΒΡΩΣΗ. Για μακροχρόνια προστασία από τα στοιχεία, αυτός ο δέκτης κοτσαδόρου ATV είναι θωρακισμένος με ανθεκτικό φινίρισμα μαύρης πούδρας. ΥΨΗΛΗ ΑΝΤΟΧΗ. Αυτός ο κοτσαδόρος δέκτη ATV είναι κατασκευασμένος από χάλυβα υψηλής αντοχής για να παρέχει αξιόπιστη ρυμούλκηση. EXTRA D-RING. Αυτός ο δέκτης κοτσαδόρου ρυμούλκησης ATV διαθέτει έναν συγκολλημένο δακτύλιο D στο επάνω μέρος για να προσαρμόσετε έναν ιμάντα ρυμούλκησης, ένα άγκιστρο ρυμούλκησης, μια αλυσίδα ή ένα σχοινί για εφαρμογές έλξης σε ευθεία γραμμή. ΧΩΡΙΣ ΣΤΡΟΦΗ. Αυτός ο προσαρμογέας κοτσαδόρου τρέιλερ ATV έχει μια ενσωματωμένη βάση χωρίς περιστροφή που ασφαλίζει στη γλώσσα του ATV όταν σφίγγεται το μπουλόνι. Αυτό βοηθά στην εξάλειψη του τζόγου στη σύνδεση ζεύξης. ΠΟΛΥΠΡΟΣΩΠΙΚΟΣ ΔΕΚΤΗΣ. Αυτός ο αντάπτορας κοτσαδόρου ATV βιδώνει σε μια γλώσσα κοτσαδόρου ATV και την εξοπλίζει με έναν τυπικό δέκτη 2 ιντσών x 2 ιντσών για να προσαρτά μια μεγάλη ποικιλία εξαρτημάτων για διαφορετικούς τύπους ρυμούλκησης ATV.
Brand CURT
Brand ‎CURT
Country of Origin ‎USA
Customer Reviews 4.3 4.3 out of 5 stars 1,630 ratings 4.3 out of 5 stars
Exterior ‎Gloss Black Powder Coat
Finish Type Powder Coated
Is Discontinued By Manufacturer ‎No
Item model number ‎45006
Item Weight 4.3 Pounds
Item Weight ‎4.3 pounds
Manufacturer ‎Curt Manufacturing
Manufacturer Part Number ‎45006
Material Alloy Steel
Model ‎ATV Tongue Adapter
OEM Part Number ‎45006
Product Dimensions ‎6 x 5 x 4 inches
Vehicle Service Type ATV, UTV, Trailer

3.4

13 Review
5 Star
67
4 Star
15
3 Star
8
2 Star
4
1 Star
6

Γράψτε την κριτική σας

Το email σας δεν θα δημοσιευτεί. Όλα τα υποχρεωτικά πεδία επισημαίνονται με*

Scritto da: Kayla Goacher
Works like a charm
Pills my trailer excellently well. Love this
Scritto da: Andy
Has a downward tilt.
Bolts on easy. Put it on my 05 Kawasaki Brute Force 650. Might just be my machine but the receiver hitch installed in this product tilts downward. It's not terrible, but bad enough that I need to remove my hitch pin if I'm running trails or I'll break it off, which I did once.
Scritto da: TexasChris
Handy as a pocket knife.
By handy, I mean this thing can allow you to do a lot of things with your ATV. I do agree with some of the concerns, you need to watch out for how it can swivel; there is a bracket included to help with this. To be honest, I don't know what kind of bolt-on, universal design would help this much more than what is included. You can always tack weld it- but for out of the package use, this thing was up and usable in no time. Do not try and change the ball on your receiver while it is in this thing... I have to change/tighten receiver hitches while it is in my truck receiver. The force of a wrench will turn this puppy in no time. Please note that if your receiver accessory/hitch is not angled at the back, it will probably hit the bolt and not clear for your pin. This is the one problem area- one that could put you in a bind if you have more than a hitch to put on. The reece 2" receiver hitch I have works great because it has a 45 degree angle in the rear. The straight cut, 2" receiver hitch I have (I do not see a brand) does NOT fit. I have this mounted on a polaris ATV. I don't see why it would not work on any ATV that has a place to put a hitch. This helps me to pull trailers because I actually have a 6X6, Polaris Magnum. Without a receiver, I easily hit my tires when making a turn. This puts the trailer a little further back, between the adapter and the actual receiver hitch, it is 12". This also will negatively affect very heavy tongue loads and is something I must watch. The further from the axle the hitch is, the more force is applied (similar to a lever idea). All-in-all, I think this a great product. Well-made, sturdy. Don't expect it to do something that is impossible.
Scritto da: Benjamin K.
Weld it so it wont rotate
I used the anti-rotate plate on the bottom of the hitch until it chewed away the lip on the mounting plate. Now it rotates so I'll have to weld it. The hitch itself is heavy duty and works well.
Scritto da: Stan555
Excellent Itme
Very well built and easy to install.
Scritto da: Amazon Customer
Very useful
Highly recommend this for various jobs associated with a four wheeler. Moving trailers, dragging things, towing items, etc. You could just put a ball on your four wheeler, but a receiver hitch gives options for different sizes and hooks, etc. with ease of use.
Scritto da: Ben Buxton
Works as expected and provides more versatility with our ATV
This product works as expected and allows me to attach a 2” receiver to our ATV. This gives us more versatility on the ranch for attaching a ball hitch to pull that type of implement. Only small issue is that the hitch mount will slightly rotate after use due to the fact there is only 1 mounting bolt. I’ve torqued it down well, but still have this issue…one for the mechanical engineers to figure out :)
Scritto da: MN Jake
Hitch for John Deere 1025R
I bought this for my John Deere 1025R sub compact tractor. The tractor has a bolt on plate with existing holes to bolt on a ball or other devices. I thought this would be perfect. Curt products seem pretty well known. I felt confident the parts would be robust. The unit seems well made like I expected. I was nervous about the reviews about the hitch rotating. I certainly didn't want that. Took a chance. Because the plate on the tractor had a larger flat spot compared to ATVs so I thought I'd rotate the v-shaped plate to use the flat end instead. Well that didn't seem to help much. I tightened all the hardware really tight but that didn't help. I think this think is going to twist. I also had to shorten the shank because it hit the bolt head and I couldn't install the pin thru the receiver. A quick cut job with a sawzall and that was fixed. I'll see how it goes but I'm thinking more work will be required. 3 stars for well built and ease of assembly but drop of 2 stars because it probably will rotate.
Scritto da: Leo B.
Awesome product.
Fit perfectly on my Honda Rubicon, attaching where the ball would be installed. Combined with the Curt 2" hitch extension it provides options to tow different equipment like toboggans and tub carts along with connect points for attaching tow straps, etc. Also extends the towing connect point back from the tires, eliminating equipment from rubbing against the tires when turning sharply or backing. Curt makes excellent, solid products.
Scritto da: Customer
Fitted my ATV good but...
Fit and looked good although despite being tightened with a 3' breaker bar and the anti-swivel plate in place there was some swivel. I believe if a fine thread bolt was supplied it may be possible to torque it even tighter. One could weld it the the ATV if you don't want to remove it....
Scritto da: Beartrack
Works great
Just what I needed
Scritto da: Tom Watson
Fits perfect
Nice addition to my ATV. Makes hauling a small trailer easier
Scritto da: BOB
easy install
used for moving cargo trailer

Σχετικά προϊόντα

Ανακαλύψτε το διεθνές μας δίκτυο

Στέλνουμε σε 28 χώρες, πάνω από 200.000 προϊόντα. Μείνετε ενημερωμένοι, εγγραφείτε στο ενημερωτικό δελτίο.

Array