Cubitron II Scotch-Brite Large Area Stripe Removal Disc - Large Eraser Wheel - Αφαιρεί αυτοκόλλητα βινυλίου, γραφικά και ταινίες ρίγες από μέταλλο - 8' x 5/8' - 7517

Brand:Cubitron

3/5

Ft
215.41

ΠΕΡΙΓΡΑΦΗ ΠΡΟΪΟΝΤΟΣ Ο δίσκος αφαίρεσης λωρίδων μεγάλης επιφάνειας Scotch-Brite αφαιρεί αποτελεσματικά τις ανεπιθύμητες λεπτομέρειες από τις μεταλλικές επιφάνειες. ΑΠΟ ΤΟΝ ΚΑΤΑΣΚΕΥΑΣΤΗ Αφαιρέστε τις ανεπιθύμητες λεπτομέρειες Χαλκομανίες, γραφικά, ταινίες βινυλίου – όταν η αξία ή η συνάφεια αυτών των γραφικών αποσυρθεί, οι κάποτε βραβευμένες λεπτομέρειες ενδέχεται να παρουσιάσουν στους χρήστες μια νέα πρόκληση: την αφαίρεση. Ο δίσκος αφαίρεσης λωρίδων μεγάλης περιοχής Scotch-Brite σχεδιάστηκε για να βοηθά στην εξάλειψη των ανεπιθύμητων λεπτομερειών με αποτελεσματικότητα και ευκολία. Ο δίσκος βοηθά στην αποκατάσταση της υποκείμενης επιφάνειας στην παλιά της αίγλη χωρίς να προκληθεί σοβαρή ζημιά ή φθορά στο υπόστρωμα. Ευκολία χρήσης Ο δίσκος αφαίρεσης λωρίδων μεγάλης επιφάνειας Scotch-Brite είναι κατασκευασμένος με ισχυρό αφρό πολυβινυλοχλωριδίου (PVC). Το ισχυρό πολυμερές μπορεί να αντέξει επαναλαμβανόμενες τριβές – φορώντας αυτοκόλλητα καλούπια και ρίγες μακριά μέσω επαναλαμβανόμενης κίνησης. Ο δίσκος δημιουργεί τριβή και θερμότητα καθώς περιστρέφεται για να αφαιρέσει καθαρά κόλλες και λωρίδες. Στη συνέχεια, η προετοιμασία με εργαλεία θερμότητας –όπως πιστολάκια, λαμπτήρες θερμότητας και πιστόλια– δεν χρειάζεται πλέον, συμβάλλοντας στην αύξηση της παραγωγικότητας και στην επιτάχυνση της διαδικασίας αφαίρεσης. Τώρα, οι χειριστές μπορούν εύκολα να αφαιρέσουν λεπτομέρειες χωρίς να χρειάζεται να προετοιμάσουν το τεμάχιο εργασίας με θερμικά εργαλεία ή ακατάστατες ενώσεις ψεκασμού και γέλης. Ο δίσκος δεν θα σκάψει, δεν θα χαλάσει ή θα βαθουλώσει τη μεταλλική επιφάνεια που βρίσκεται κάτω από τα αυτοκόλλητα, γι' αυτό χρησιμοποιείται συχνά σε τζελ παλτά, ακρυλικά σμάλτα και χρώματα ουρεθάνης. Επιπλέον, ο δίσκος ασκεί πίεση, επομένως ο χειριστής δεν χρειάζεται να ξύνει με το χέρι με κάρτα, σφουγγάρι ή μαχαίρι. Αυτός ο δίσκος μπορεί να χρησιμοποιηθεί με μια ποικιλία εργαλείων, συμπεριλαμβανομένου ενός μύλου ή ασύρματου τρυπανιού.;Πλεονεκτήματα της κατασκευής που μοιάζει με γκοφρέτα Ο δίσκος αφαίρεσης λωρίδων μεγάλης επιφάνειας Scotch-Brite μπορεί να καθαρίσει μεγαλύτερη επιφάνεια σε σύγκριση με το Scotch-Brite Molding Adhesive και δίσκος αφαίρεσης λωρίδας. Μια σειρά από λεπτούς δίσκους στοιβάζονται σε έναν άξονα για να σχηματίσουν μια κατασκευή που μοιάζει με γκοφρέτα. Καθώς ασκείται πίεση, οι δίσκοι απλώνονται, διακριτικά, για να επεκτείνουν την εμβέλειά τους. Έχοντας την κατασκευή που μοιάζει με γκοφρέτα, έναντι μιας συμπαγούς καμπύλης, επιτρέπει στον χρήστη να έχει πρόσβαση σε μια ακόμη μεγαλύτερη επιφάνεια. Συνολικά, ο δίσκος αφαίρεσης λωρίδων μεγάλης περιοχής Scotch-Brite βοηθά στη μείωση του χρόνου προετοιμασίας, των ακατάστατων ενώσεων και της κόπωσης του χειριστή. Με τον δίσκο αφαίρεσης λωρίδων μεγάλης περιοχής Scotch-Brite, η εντατική διαδικασία αφαίρεσης ανεπιθύμητων λεπτομερειών γίνεται ευκολότερη και πιο αποτελεσματική.

Το λειαντικό γυαλίζει τη μεταλλική επιφάνεια χωρίς να σκαλίζει ή να οργώνει, μειώνοντας την πιθανότητα να καταστραφεί η επιφάνεια. Η κατασκευή στοιβαγμένης γκοφρέτας βοηθά στην κάλυψη μεγαλύτερων επιφανειών. Μπορεί να χρησιμοποιηθεί με φορητά εργαλεία χειρός. Ο δίσκος παράγει θερμότητα καθώς περιστρέφεται, ελαχιστοποιώντας την ανάγκη προετοιμασίας με εργαλεία θερμότητας. Το πολυβινυλοχλωρίδιο (PVC) είναι ανθεκτικό και αντέχει στην επαναλαμβανόμενη τριβή για αποτελεσματική αφαίρεση ανεπιθύμητων χαλκομανιών. Αφαιρεί αποτελεσματικά ανεπιθύμητες χαλκομανίες βινυλίου, γραφικά και ταινίες από μεταλλικές επιφάνειες. Το λειαντικό γυαλίζει τη μεταλλική επιφάνεια χωρίς να σκαλίζει ή να οργώνει, μειώνοντας την πιθανότητα να καταστραφεί η επιφάνεια. Η κατασκευή στοιβαγμένης γκοφρέτας βοηθά στην κάλυψη μεγαλύτερων επιφανειών. Μπορεί να χρησιμοποιηθεί με φορητά εργαλεία χειρός. Ο δίσκος παράγει θερμότητα καθώς περιστρέφεται, ελαχιστοποιώντας την ανάγκη προετοιμασίας με εργαλεία θερμότητας. Το πολυβινυλοχλωρίδιο (PVC) είναι ανθεκτικό και αντέχει στην επαναλαμβανόμενη τριβή για αποτελεσματική αφαίρεση ανεπιθύμητων χαλκομανιών. Αφαιρεί αποτελεσματικά ανεπιθύμητες χαλκομανίες βινυλίου, γραφικά και ταινίες από μεταλλικές επιφάνειες.
Brand Cubitron
Compatible Devices Die Grinder
Construction Type Coated
Country of Origin USA
Domestic Shipping Item can be shipped within U.S.
Grit Number 60
International Shipping This item can be shipped to select countries outside of the U.S.
Item Diameter 8 Inches
Item model number 07517
Manufacturer 3M
Package Dimensions 9.4 x 9.3 x 3.3 inches; 1.9 Pounds

3

8 Review
5 Star
59
4 Star
9
3 Star
11
2 Star
8
1 Star
13

Γράψτε την κριτική σας

Το email σας δεν θα δημοσιευτεί. Όλα τα υποχρεωτικά πεδία επισημαίνονται με*

Scritto da: K M
Pretty effective, but you need to get the angle ...
Pretty effective, but you need to get the angle exactly right for maximum effectiveness. Also, quite a forearm workout, as pretty firm,accurate pressure is needed to remove boat decals.
Scritto da: Scott Hassan
Soesnt co.e with needed adapter which is t avaable on amazon
No way to use it as the adapter to use on a buffer does not come with it, nor is it available from Amazon or anywhere on Google. Kind of bs from a product made by 3m.
Scritto da: patrick
Removes Vinyl Decals, Graphics, and Striping Tapes quickly without damaging the paint finish.
The media could not be loaded. I needed to remove signage on a 13-year-old box truck with a lot of sun-baked on cracked vinyl due to the hot climate in the Bahamas. I purchased 2 Scotch-Brite Eraser Wheels on Amazon for $79.98ea and 2 heat guns to test which product works best. After using both vinyl removal systems, heat guns make quick easy work of removing vinyl from fiberglass box trucks. However, a heat gun is almost useless if the vinyl is very old, cracked, and sun-baked on after many years. You will need a Scotch-Brite Large Area Stripe Removal Disc - Large Eraser Wheel. They work fantastic for removing vinyl but do require some work as holding a grinder machine quickly becomes very laborious. There is also a little bit of a learning curve to using the Scotch-Brite eraser wheel. The secret is to apply as little pressure as possible and finding the "sweet-spot" angle of attack when removing vinyl. It is important to just allow the eraser wheel to barely, but firmly, touch the working surface. Too much pressure with the wrong angle and the tool becomes too difficult to control and literally runs away from you. Expect to get totally covered in vinyl bits and dust as well. So be sure to have proper eye protection, and face masks on hand before starting your project. My synopsis is, having both heat gun and Scotch Brite vinyl eraser products is absolutely essential for bigger vinyl removals projects, as they perform different tasks when removing vinyl lettering, decals, and graphics.
Scritto da: Justin Maulkeet
Best decal removal tool on the market
This product is also referred to as 3M LASR Disk. It works in combination with a standard powered rotary buffer such as https://www.amazon.com/Makita-9237CX3-Variable-Polisher-Sander-Polishing/dp/B00OKEDW0M/ref=sr_1_1?ie=UTF8&qid=1465598799&sr=8-1&keywords=makita+buffer which is what I purchased for the job. It does require an adapter nut, which I purchased at my local detailer supply shop the first time I bought one of these disks. Amazon sells it for about the same as that suppliers "wholesale" cost. If you need to remove striping, lettering, or decals off of the metal of vehicles, this is THE tool to use. It pulls the vinyl and adhesive off in short time. On fiberglass or gelcoat such as boat or motor home it does the same thing but requires additional work. You must keep the tool moving so you dont burn the gelcoat. I do not recommend its use at all on fiberglass/gelcoat if you are not covering back up with new graphics/striping for this reason. Just about every decal I remove on Rv's is being replaced with new decals so not a big deal. In that case remove from the middle out and leave the last 1/4" of vinyl at the edge just in case you burn it a little. Remove the last little bit using scrubbing bubbles bathroom cleaner https://www.amazon.com/Scrubbing-Bubbles-Antibacterial-Bathroom-Cleaner/dp/B00HY51IIM/ref=sr_1_1_s_it?s=hpc&ie=UTF8&qid=1465599245&sr=1-1&keywords=scrubbing+bubbles to soften the vinyl and a good razor scraper being very careful. Wipe off any excess cleaner before it dries since it leaves a crusty residue. If you get any residue, just respray it and wipe. To remove any remaining adhesive use Rapid Remover https://www.amazon.com/REMOVER-Adhesive-Remover-Graphics-Stripes/dp/B006RUJ2D8/ref=sr_1_3?ie=UTF8&qid=1465599350&sr=8-3&keywords=rapid+remover make sure to wear gloves. Oh speaking of safety using a face mask will become obvious to you in the first minute. It sprays particles of torn off vinyl back at you as it tears them off. I either wear goggles with a dust mask or a full shield when working depending on the outdoor conditions. The UVEX mask is nice https://www.amazon.com/dp/B001VXXUWK/ref=wl_it_dp_o_pC_nS_ttl?_encoding=UTF8&colid=2NJ9BR096AWLR&coliid=I2XRMA3HOMJFXR
Scritto da: Allen M
Works Great, Stick to RPM
Works very well but really pay attention to the RPM. Too fast and it will come apart and hurt you. I have a couple of bruises to prove it ????
Scritto da: Kindle Customer
Additional part needed
This item is not usable as sold. The type tool needed to use this disc is a side grinder/polisher. You will need an adapter. It is not available. That part has been discontinued. I was able to find one through another vendor at an additional cost to me. After you get the adapter and get it attached to the tool, the disc does take off strips but wears out quickly.
Scritto da: reader
Great eraser wheel
This item worked great to remove the old decals from my RV. I used it with the cheap car polisher from Harbor Freight. I had to get a 5/8 rod nut to connect the two items. Removed all decals from my 31 foot RV so it saved me money when I had new decals installed.
Scritto da: Pat McGroin
To use this product go to Home Depot or some ...
To use this product go to Home Depot or some other hardware store a simple 5/8" -11 x2 1/8 coupling nut is what I used to "adapt" it to my mikita sander polisher. Additional cost $2.16, plus the walk three aisles over from the acetone that I needed to remove the residual glue from my rv.

Σχετικά προϊόντα

Ανακαλύψτε το διεθνές μας δίκτυο

Στέλνουμε σε 28 χώρες, πάνω από 200.000 προϊόντα. Μείνετε ενημερωμένοι, εγγραφείτε στο ενημερωτικό δελτίο.

Array