Αναδευτήρας βαφής Astro Pneumatic - Air Operated Paint (4550A)

Name: Αναδευτήρας βαφής Astro Pneumatic - Air Operated Paint (4550A)
Brand: Astro Pneumatic Tool
SKU: 0785971990924
Price: 302.16 HUF
Availability: InStock

Brand:Astro Pneumatic Tool

3.5/5

Ft
302.16

Οι ρυθμιζόμενοι σφιγκτήρες ασφάλισης με επίστρωση καουτσούκ προσφέρουν αυξημένη πρόσφυση κατά το κούνημα και για να χωρέσουν πίντες, λίτρα, γαλόνια και μεγαλύτερα ευρωπαϊκά δοχεία. Βεβαιωθείτε ότι το περιλαμβανόμενο λάδι λαδιού είναι πάντα τουλάχιστον κατά το ήμισυ γεμάτο για ανθεκτικότητα του εργαλείου, καθώς στεγνώνει θα καταστρέψει τις στεγανοποιήσεις και θα προκαλέσει τη στασιμότητα του αναδευτήρα. Μηχανισμός τροχιακής κίνησης σε εκκρεμότητα ευρεσιτεχνίας. Πιο αθόρυβη και ταχύτερη λειτουργία. Νέο και βελτιωμένο μέγεθος σφιγκτήρα για προσαρμογή μεγέθους δοχείου που κυμαίνεται από πίντα έως γαλόνι και ακόμη μεγαλύτερα ευρωπαϊκά δοχεία βαφής.

Ποσό

Προσθήκη στο καλάθι Αγορασε τωρα

EAN: 0785971990924

Κατηγορίες Εργαλεία & Είδη οικιακής βελτίωσης, Εργαλεία ισχύος & χειρός, Μέρη & αξεσουάρ ηλεκτρικών εργαλείων, Αξεσουάρ για εργαλεία αέρος, Λάντζες,

Brand	Astro Pneumatic Tool
Color	Standard
Item Dimensions LxWxH	16.9 x 8.3 x 14.6 inches
Item Weight	19.3 Pounds
Material	Rubber
Maximum Pressure	120 Pound per Square Inch

5 Star

4 Star

3 Star

2 Star

1 Star

Γράψτε την κριτική σας

Το email σας δεν θα δημοσιευτεί. Όλα τα υποχρεωτικά πεδία επισημαίνονται με^*

Η βαθμολογία σας

Scritto da: R. Tardiff

Gets the Job done

I had borrowed a similar shaker from a friend. It worked fine, once I bolted it down (otherwise, it does a most entertaining dance across whatever surface it sits on). I've used my new tool once. So far, so good.

Scritto da: Berry C.

All shook up

Perfect for my shop and reasonable price, works well

Scritto da: Sabesh kanagalingam

Very noisy

Very noisy and jumpy

Scritto da: Alex

Great product just terrible insctrutions

The only issue, they should have mentioned in the instructions that the oil goes into the little clear cylinder which is right after the air inlet.

Scritto da: J. Shipley

So far so good.

Secured it to my main table made from 4x4's using lags. Creates quite a rattle and the paint cans get looser the longer they go. Using the recommended shake times work fine, but don't let it go longer or you might lose a can. Setup was easy, but I am worried about the acrylic oil cylinder breaking one day. I made sure to install this unit so the air ingress is facing away from traffic areas and I ensured the hose is attached in as stress free a way as possible. I'm not sure how I could replace that part if it broke.

Scritto da: Chad C.

Works Great!!!

Well I’ve had this paint shaker for a year and a half and I do not use it every single day. I am not using it every day like a automotive body shop would. I restore airplanes. The first paint shaker I had probably had a total of five hours and it blown out the O-ring on the piston. So I replaced the O-ring and it worked great but it only lasted maybe another hour or so after I replaced the O ring. So I called Amazon and told them what had happened and they said that it was past the 90 days for return. BUT someone pulled a few strings and they ended up letting me return it and I ordered a new one just like it. The new one works great so far. ????????????

Scritto da: Ray C.

Needs a little fine tuning

It’s a good paint shaker but I have to stand beside it while it’s running because the jaws that hold the can work loose. Also I’ve had to take some of the slop out it the jaw bases where they meet the angle iron. It was very loose and bothersome to me. I’m going to put some vibration isolators on it sad well because it really vibrates the heavy bench I have it mounted to.

Scritto da: Lucifer J Morningstar

Loads of power for the price!!!!

You need to purchase prices worth it. If you do any painting at all which we paint professionally industrial / automotive slash pretty much anything this thing mixes your paint perfectly every time has loads of power to use highly recommended!!!!

Scritto da: JHH

Works well!

It shakes paint cans as intended. Be advised of this: It consumes a high flow of air. Need a big compressor to feed it. I have an average compressor, and I have to stop the shaker to let the compressor refill a few times. Also, it requires solid clamping to a stable and heavy table, or else it will shake off that support as much as the paint.

Scritto da: Don Campbell

Quality 2 of 5, and operation is 4 of 5

The grease nipple on the outer shaft comes right off due to it being threaded in plastic. The inside grease nipple works fine; but due to the design of the unit, the grease gun is impossible to get off the nipple without drilling a hole in the side of the unit and using a screw driver to pry the gun from the nipple. Very poor design!!!!!!

Scritto da: Hudson

Poor quality control

Finally set this up in my shopa s I have lots of things to paint. Did not even last through one can of paint air motor sticks all the time and now does not run at all. So basically junk to me. Missed my return window!

Scritto da: Amazon Customer

Grease nipple needs new design

The grease nipple on the outer shaft came right off. I'm on my third shaker I've bought and Paid for because I need it but they just don't last long.It starts to not shake anymore after a three months- maybe 5 the most. We use it 5 days a week. Very poor design! Wish it could improve more to last!

Scritto da: Marc Lischka

Excellent

Awsome bit of kit