Anderson Metals - 56123-0806 Brass Pipe Fitting, Reducing Hex θηλή, 1/2 αρσενικός σωλήνας x 3/8 αρσενικός σωλήνας 1/2 x 3/8 1

Brand:Anderson Metals

3.6/5

Ft
32.55

Το εξάρτημα εξάγωνης θηλής μείωσης Anderson Metals είναι κατασκευασμένο από ορείχαλκο και έχει συνδέσεις με σπείρωμα αρσενικού National Pipe Taper (NPT). Αυτό το εξάγωνο εξάρτημα μειωτικής θηλής έχει το ένα άκρο μικρότερο από το άλλο για τη σύνδεση δύο σωλήνων με σπείρωμα με διαφορετικές διαμέτρους και έχει εξαγωνική κεφαλή για αυξημένη επιφάνεια έδρασης κατά τη ρύθμιση του εξαρτήματος με κλειδί. Διαθέτει αρσενικά σπειρώματα NPT για σύνδεση με θηλυκούς σωλήνες με σπείρωμα, δημιουργώντας πιο σφιχτό σφράγισμα από τα ίσια σπειρώματα. Αυτό το εξάρτημα είναι κατασκευασμένο από ορείχαλκο για αντοχή στη διάβρωση, ολκιμότητα σε υψηλές θερμοκρασίες και χαμηλή μαγνητική διαπερατότητα. Ο ορείχαλκος μπορεί να συνδεθεί με χαλκό, ορείχαλκο, πλαστικό, αλουμίνιο και συγκολλημένο χάλυβα. Οι θερμοκρασίες λειτουργίας για αυτό το εξάρτημα κυμαίνονται από -53 έως 121 βαθμούς C (-65 έως 250 βαθμούς F). Αυτό το εξάρτημα πληροί τις προδιαγραφές B16 της American Society for Testing and Materials (ASTM) B584 και της Αμερικανικής Εταιρείας Μηχανολόγων Μηχανικών (ASME)/American National Standards Institute (ANSI) για τη διασφάλιση ποιότητας. Τα εξαρτήματα σωλήνων είναι εξαρτήματα που χρησιμοποιούνται για τη σύνδεση, τον τερματισμό, τον έλεγχο της ροής και αλλάζοντας την κατεύθυνση των σωληνώσεων σε πολλούς διαφορετικούς κλάδους. Όταν αγοράζετε εξαρτήματα σωλήνων, εξετάστε την εφαρμογή, καθώς αυτό θα επηρεάσει τον τύπο του υλικού, το σχήμα, το μέγεθος και την απαιτούμενη αντοχή. Τα εξαρτήματα διατίθενται με σπείρωμα ή χωρίς σπείρωμα, σε πολλά σχήματα, στυλ, μεγέθη και σχέδια (πάχος τοιχώματος σωλήνα). Η Anderson Metals κατασκευάζει ορειχάλκινα εξαρτήματα, βαλβίδες και θηλές σωλήνων. Η εταιρεία, που ιδρύθηκε το 1951, έχει την έδρα της στο Κάνσας Σίτι, MO.

EAN: 0719852920380

Κατηγορίες Βιομηχανικά & Επιστημονικά,

Αυτά τα εξαρτήματα περιέχουν μόλυβδο και δεν επιτρέπεται από την ομοσπονδιακή νομοθεσία να εγκατασταθούν για χρήση πόσιμου νερού στις Η.Π.Α. και στις περιοχές τους. Σημείωση: Ανατρέξτε στο διάγραμμα μεγεθών σωλήνα ή σπειρώματος πριν την παραγγελία. Πληροί τις προδιαγραφές ASTM B584 και ASME/ANSI B16 για διασφάλιση ποιότητας. Οι θερμοκρασίες λειτουργίας κυμαίνονται από -53 έως 121 βαθμούς C (-65 έως 250 βαθμούς F). Ορείχαλκος για αντοχή στη διάβρωση, ολκιμότητα σε υψηλές θερμοκρασίες και χαμηλή μαγνητική διαπερατότητα. Σπειρώματα Male National Pipe Taper (NPT) για σύνδεση σε θηλυκούς σωλήνες με σπείρωμα, Μείωση εξαγωνικής θηλής για σύνδεση δύο σωλήνων με σπείρωμα με διαφορετικές διαμέτρους. Σημείωση: Τα μεγέθη τοποθέτησης σωλήνων βασίζονται στο Ονομαστικό μέγεθος σωλήνα. Για να προσδιορίσετε το σωστό μέγεθος που απαιτείται, μετρήστε την εξωτερική διάμετρο του νήματος και επιλέξτε το Μέγεθος σωλήνα πάνω από το οποίο ταιριάζει με το νήμα O.D. μέγεθος στο διάγραμμα μεγεθών τοποθέτησης σωλήνα.
Brand Anderson Metals
Color Brass
Connector Type Nipple
Country of Origin USA
Domestic Shipping Item can be shipped within U.S.
Exterior Finish Brass
International Shipping This item can be shipped to select countries outside of the U.S.
Item model number 56123-0806
Item Weight 0.11 Pounds
Manufacturer Anderson Metals
Material Brass
Number of Pieces 1
Package Dimensions 3.58 x 2.36 x 1.46 inches; 1.76 Ounces
Size 1/2" x 3/8"
Thread Type Connecting to Female Threaded Pipes

3.6

13 Review
5 Star
75
4 Star
12
3 Star
6
2 Star
2
1 Star
6

Γράψτε την κριτική σας

Το email σας δεν θα δημοσιευτεί. Όλα τα υποχρεωτικά πεδία επισημαίνονται με*

Scritto da: Wilson
EXACTLY WHAT I AM LOOKING FOR
This is exactly what I am looking for. Very satisfy.
Scritto da: Octavius
Perfect for Weber Grill or Ooni pizza oven
I got my Weber Genesis II grill setup the other day, then realized the quick connect it comes with is not ready to attach to my stub. God knows why they do this, but they send you a quick connect with 3/8 female NPT threads, when most homes have female 1/2. Why they don't ship it with a 1/2 male connection is a mystery. I remember 2 years ago when I bought my dad his grill that he had the same issue, but assumed at the time it was because their house was 40 years old and nonstandard. So anyway, I ordered this and some Teflon/PTFE tape for same day delivery, since weirdly no one in town stocks this connector. Make sure not to use the white stuff, it's way too thin and would require too many wraps to make a proper seal. Technically if you're following code, you'd need pink since it's spec for gas piping with 1/2" threads and over, but I'm sure yellow would be fine. The yellow stuff is cheaper at your local hardware store, but I just got my tape with the connector since it wasn't worth an extra trip (and no one in town stocked pink). Once I got it in and taped up both sets of threads, I screwed it tight into the Weber quick connect, then screwed the quick connect to my gas stub. After that I checked it for leaks with soapy water just to be safe and fired up my grill. It's much more compact that Webers suggested black iron pipe, and looks a lot cleaner too. I know this is an issue for the Genesis II grills, but I assume you'll need one for the new Genesis as well. My dad also got an Ooni natural gas pizza oven and faced the same situation, so if you have one of those you'll probably need this part as well.
Scritto da: Stephen
Good
Good
Scritto da: Blake3
Well made
Seemed like a well made part, although received wrong size
Scritto da: Amazon Customer
Good quality.
Got the job done, would recommend
Scritto da: Pam Kirkendall
Must have part for Weber Grill Natural Gas Hookup!!
Purchased a Weber Spirit II Natural Gas Grill. This part is essential to attach to the “quick release” hose that comes with the grill to then attach to the shutoff valve. DO NOT try to use a reducer that had a “flanged” end. It will NOT work.
Scritto da: Kennedy
Perfect fit for connecting my NG grill
Purchased this adapter to convert the 1/2” gas line connector from my house to the 3/8” gas line from my Weber Genesis grill. Easy to install and was a perfect fit. Tested the connections and no signs of leaking.
Scritto da: Kathy
Poorly machined
The 1/4” side is fine but the 3/8” side wasn’t fully machined so the threads won’t catch the female end I’m trying to connect. I’ve even used other 3/8” fitting to make sure it’s the correct size, and they all connect perfect. But this one just keeps turning and won’t catch.
Scritto da: L. Baydak
Machining defect.
There was a ridge line crossing all the threads on the 1/2" NPT part of the fitting. In the photo you can see a dark like running down the centre of the bright illuminated stripe. I suspect that it was a manufacturing defect (from a die maybe?). I can feel it catching my fingernail. Anyway. The fitting is scrap, since it would be near impossible to make a good seal, what with the sharp edge scoring and cutting holes and gaps in any thread tape or sealant I used.
Scritto da: Jabus
Not correct 3/8 size
3/8 sizing is incorrect
Scritto da: Amir G.
Great fit
Used this to connect my 1/2" gas supply line to a 3/8" quick connect adapter. Fits great and seems to be of good quality.
Scritto da: Amazon Customer
The size in the description is not correct
I went to the hardware store and got the correct fitting in five minutes. Some things are just better done in person.
Scritto da: Justine Milton
Works great!
I used this for my natural gas BBQ connection with some yellow pipe dope. I have been using it for many months and it has not developed any leaks or corroded outdoors. Very happy with the purchase!

Σχετικά προϊόντα

hot
Vulcan Hart 825536 Quartz Heater
4/5

Ft 133.92

Vulcan Hart 825536 Quartz Heater
4/5

Ft 133.92

hot
Nieco 20860 Incendalyst
0/5

Ft 1399.74

Nieco 20860 Incendalyst
0/5

Ft 1399.74

Ανακαλύψτε το διεθνές μας δίκτυο

Στέλνουμε σε 28 χώρες, πάνω από 200.000 προϊόντα. Μείνετε ενημερωμένοι, εγγραφείτε στο ενημερωτικό δελτίο.

Array